| Color: | |
|---|---|
| Quantity: | |
6006ET+D101-MB
MAXAL
Door Knobs for Interior Doors Deadbolt Lock Combo Set from China manufacturer - MAXAL Locks
Door Knobs for Interior Doors Deadbolt Lock Combo Set offered by China manufacturer MAXAL Locks. Buy Door Knobs for Interior Doors Deadbolt Lock Combo Set directly with low price and high quality.
About this item
Item No. | 6007ET+D101-MB |
Funciton | Entrance/Privacy/Passage |
Finish | Matte Black |
Material | Stainless Steel |
Backset | 2-3/8"(60mm) to 2-3/4"(70mm) |
Door Thicknesses | Standard 35mm To 45mm(1-3/8” To 1-3/4"),Otherthickness Is Available |
Salty Spray Testing | Above 72 Hours |
Cycle Testing | Exceeds 250,000 cycles |
Product Certification | ANSI Grade 3 |
Place of Origin | Guangdong, China |
What's in the pack?
Products Description
Why choose us
FQA
1. Product Basic Information
Q: What is the difference between stainless steel 201 and stainless steel 304?
A: Stainless steel 201 contains higher manganese and lower nickel content, making it more cost-effective with good strength and hardness, suitable for indoor and general environments. Stainless steel 304 has higher nickel content and superior corrosion resistance, ideal for humid or outdoor environments.
2. Materials & Craftsmanship
Q: Will stainless steel 201 ball locks rust?
A: Under normal indoor dry conditions, rust is unlikely. However, prolonged exposure to humid, high-salt, or acidic environments may cause minor rust spots. Keep dry and clean regularly.
3. Installation & Versatility
Q: What is the installation backset for a 3-spindle ball lock?
A: Standard 3-spindle ball locks typically have a 70mm or 60mm backset.
Door Knobs for Interior Doors
Deadbolt Lock
Combo Set
Combo Lock Single Cylinder Deadbolt with Round Knob Lock from China manufacturer - MAXAL Locks
Material: Stainless Steel
Latch: 2-3/8"(60mm) to 2-3/4"(70mm) Adjustable Latch
Cylinder: 5 or 6 pin tumbler cylinder, brass plug and zinc housing, Kwikset, Schlage c and Weiser keyway available
Keys: 2 or 3 brass keys
Faceplate: Square corner 1"x2-1/4"(25x57mm) standard. radius corner are also available
Strike: Full lip D-shape 1-3/4" X 2-1/4"(44x57mm) Square or Radius standard
Description: Tubular Knobset Lock
Door Handing: Left Hand and Right Hand
Door Hole: Cross bore 2-1/8"(54mm),Edge bore1"(25mm),Latch face 1"x2-1/4"(25x57mm)
Color: Satin Nickel, Satin Chrome, Anqitue Nickel, Oil Rubbed Bronze, Matt Black Finishes are available
